Différences

Ci-dessous, les différences entre deux révisions de la page.

--- nas:dockstar:amelioration:ajout_sd-card [22 /06/2012 20:02]
psolyca [Modification] - Ajout modification matérielle
+++ nas:dockstar:amelioration:ajout_sd-card [17 /11/2016 15:03] (Version actuelle)
psolyca ↷ Page déplacée de dockstar:amelioration:ajout_sd-card à nas:dockstar:amelioration:ajout_sd-card
@@ Ligne 17: / Ligne 17: @@
 ==== Avant modification ====
+Le log de démarrage est le même que celui de la RTC après modification :
+<code>
+[    0.000000] Booting Linux on physical CPU 0
+[    0.000000] Linux version 3.3.8 (psolyca@Inspiron) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Jun 16 19:33:52 CEST 2012
+[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
+[    0.000000] CPU: VIVT data cache, VIVT instruction cache
+[    0.000000] Machine: Seagate FreeAgent DockStar
+[    0.000000] Memory policy: ECC disabled, Data cache writeback
+[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
+[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2
+[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
+[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
+[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
+[    0.000000] Memory: 128MB = 128MB total
+[    0.000000] Memory: 126860k/126860k available, 4212k reserved, 0K highmem
+[    0.000000] Virtual kernel memory layout:
+[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
+[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
+[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
+[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
+[    0.000000]       .text : 0xc0008000 - 0xc02b1000   (2724 kB)
+[    0.000000]       .init : 0xc02b1000 - 0xc02cf000   ( 120 kB)
+[    0.000000]       .data : 0xc02d0000 - 0xc02ec9e0   ( 115 kB)
+[    0.000000]        .bss : 0xc02eca04 - 0xc02f9918   (  52 kB)
+[    0.000000] NR_IRQS:114
+[    0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0
+[    0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1
+[    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
+[    4.441968] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
+[    4.531961] pid_max: default: 32768 minimum: 301
+[    4.532082] Mount-cache hash table entries: 512
+[    4.532333] CPU: Testing write buffer coherency: ok
+[    4.532534] Setting up static identity map for 0x258140 - 0x25817c
+[    4.533819] NET: Registered protocol family 16
+[    4.534786] Kirkwood: MV88F6281-A0, TCLK=200000000.
+[    4.534800] Feroceon L2: Cache support initialised.
+[    4.541057] bio: create slab <bio-0> at 0
+[    4.541995] SCSI subsystem initialized
+[    4.542557] usbcore: registered new interface driver usbfs
+[    4.542694] usbcore: registered new interface driver hub
+[    4.542851] usbcore: registered new device driver usb
+[    4.543935] Switching to clocksource orion_clocksource
+[    4.545493] NET: Registered protocol family 2
+[    4.545622] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
+[    4.545852] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
+[    4.545952] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
+[    4.546005] TCP: Hash tables configured (established 4096 bind 4096)
+[    4.546014] TCP reno registered
+[    4.546027] UDP hash table entries: 256 (order: 0, 4096 bytes)
+[    4.546049] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
+[    4.546221] NET: Registered protocol family 1
+[    4.547688] squashfs: version 4.0 (2009/01/31) Phillip Lougher
+[    4.547702] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
+[    4.548038] msgmni has been set to 247
+[    4.548068] io scheduler noop registered
+[    4.548077] io scheduler deadline registered (default)
+[    4.616125] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
+[    4.636941] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
+[    4.966236] console [ttyS0] enabled
+[    4.971141] ONFI flash detected
+[    4.974406] ONFI param page 0 valid
+[    4.977911] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08AAD)
+[    4.985618] Scanning device for bad blocks
+[    5.077975] Bad eraseblock 1188 at 0x000009480000
+[    5.146637] Creating 3 MTD partitions on "orion_nand":
+[    5.151804] 0x000000000000-0x000000100000 : "u-boot"
+[    5.157693] 0x000000100000-0x000000500000 : "uImage"
+[    5.163517] 0x000000500000-0x000010000000 : "root"
+[    5.169525] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
+[    5.176507] mv643xx_eth smi: probed
+[    5.181885] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address XX:XX:XX:XX:XX:XX
+[    5.190862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[    5.197475] orion-ehci orion-ehci.0: Marvell Orion EHCI
+[    5.202775] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
+[    5.233978] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
+[    5.253965] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
+[    5.260489] hub 1-0:1.0: USB hub found
+[    5.264282] hub 1-0:1.0: 1 port detected
+[    5.268602] Initializing USB Mass Storage driver...
+[    5.273675] usbcore: registered new interface driver usb-storage
+[    5.279729] USB Mass Storage support registered.
+[    5.284814] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
+[    5.290841] cpuidle: using governor ladder
+[    5.295874] TCP westwood registered
+[    5.299379] NET: Registered protocol family 17
+[    5.304080] 8021q: 802.1Q VLAN Support v1.8
+[    5.308428] rtc-mv rtc-mv: setting system clock to 2000-01-01 00:05:56 UTC (946685156)
+[    5.316746] Waiting 10sec before mounting root device...
+[    5.583971] usb 1-1: new high-speed USB device number 2 using orion-ehci
+[    5.736011] hub 1-1:1.0: USB hub found
+[    5.740074] hub 1-1:1.0: 4 ports detected
+[    6.024208] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
+[    6.137797] scsi0 : usb-storage 1-1.2:1.0
+[    7.135036] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
+[    7.145232] sd 0:0:0:0: [sda] 7834944 512-byte logical blocks: (4.01 GB/3.73 GiB)
+[    7.153542] sd 0:0:0:0: [sda] Write Protect is off
+[    7.158841] sd 0:0:0:0: [sda] No Caching mode page present
+[    7.164363] sd 0:0:0:0: [sda] Assuming drive cache: write through
+[    7.173340] sd 0:0:0:0: [sda] No Caching mode page present
+[    7.178866] sd 0:0:0:0: [sda] Assuming drive cache: write through
+[    7.186005]  sda: sda1 sda2
+[    7.191215] sd 0:0:0:0: [sda] No Caching mode page present
+[    7.196746] sd 0:0:0:0: [sda] Assuming drive cache: write through
+[    7.202867] sd 0:0:0:0: [sda] Attached SCSI removable disk
+[   15.325225] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
+[   15.341848] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
+[   15.351992] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
+[   15.359115] VFS: Mounted root (ext2 filesystem) on device 8:1.
+[   15.365375] Freeing init memory: 120K
+- preinit -
+Press the [f] key and hit [enter] to enter failsafe mode
+- regular preinit -
+[   19.563596] EXT4-fs (sda1): re-mounted. Opts: (null)
+- init -
+Please press Enter to activate this console. [   19.810606] loop: module loaded
+[   19.838546] ip_tables: (C) 2000-2006 Netfilter Core Team
+[   19.910687] nf_conntrack version 0.5.0 (1984 buckets, 7936 max)
+[   20.015120] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+[   20.029202] uhci_hcd: USB Universal Host Controller Interface driver
+[   20.042941] usbcore: registered new interface driver ums-alauda
+[   20.055724] usbcore: registered new interface driver ums-cypress
+[   20.068796] usbcore: registered new interface driver ums-datafab
+[   20.081580] usbcore: registered new interface driver ums-freecom
+[   20.094685] usbcore: registered new interface driver ums-isd200
+[   20.107498] usbcore: registered new interface driver ums-jumpshot
+[   20.120100] usbcore: registered new interface driver ums-karma
+[   20.133020] usbcore: registered new interface driver ums-sddr09
+[   20.146069] usbcore: registered new interface driver ums-sddr55
+[   20.159075] usbcore: registered new interface driver ums-usbat
+[   20.173162] sd 0:0:0:0: Attached scsi generic sg0 type 0
+BusyBox v1.19.4 (2012-06-16 19:13:10 CEST) built-in shell (ash)
+Enter 'help' for a list of built-in commands.
+  _______                     ________        __
+ |       |.-----.-----.-----.|  |  |  |.----.|  |_
+ |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
+ |_______||   __|_____|__|__||________||__|  |____|
+          |__| W I R E L E S S   F R E E D O M
+ -----------------------------------------------------
+ ATTITUDE ADJUSTMENT (Bleeding Edge, r32388)
+ -----------------------------------------------------
+  * 1/4 oz Vodka      Pour all ingredients into mixing
+  * 1/4 oz Gin        tin with ice, strain into glass.
+  * 1/4 oz Amaretto
+  * 1/4 oz Triple sec
+  * 1/4 oz Peach schnapps
+  * 1/4 oz Sour mix
+  * 1 splash Cranberry juice
+ -----------------------------------------------------
+root@OpenWrt:/#
+</code>
 ==== Modification ====
 === Matérielle ===
-{{:dockstar:amelioration:sdcard_front_up.jpg?direct&200|}}
+{{:dockstar:amelioration:ajout_sd-card:sdcard_front_up.jpg?direct&200|}}
-{{:dockstar:amelioration:sdcard_front_down.jpg?direct&200|}}
+{{:dockstar:amelioration:ajout_sd-card:sdcard_front_down.jpg?direct&200|}}
-{{:dockstar:amelioration:sdcard_rear.jpg?direct&200|}}\\
+{{:dockstar:amelioration:ajout_sd-card:sdcard_rear.jpg?direct&200|}}\\
 \\
 J'ai cherché pendant un bout de temps comment faire tenir l'adaptateur de la carte micro-SD.\\

Wiki de notes

Outils pour utilisateurs

Outils du site

Différences

Outils de la page