Outils pour utilisateurs
nas:dockstar:amelioration:ajout_rtc
Différences
Ci-dessous, les différences entre deux révisions de la page.
| Les deux révisions précédentes Révision précédente Prochaine révision | Révision précédente | ||
|
nas:dockstar:amelioration:ajout_rtc [22 /06/2012 19:59] psolyca [Modification] |
nas:dockstar:amelioration:ajout_rtc [17 /11/2016 15:03] (Version actuelle) psolyca ↷ Liens modifiés en raison d'un déplacement. |
||
|---|---|---|---|
| Ligne 1: | Ligne 1: | ||
| - | En suivant pas mal d'informations, j'ai ajouté la RTC au DockStar. | ||
| - | |||
| Liens de référence :\\ | Liens de référence :\\ | ||
| http://archlinuxarm.org/forum/viewtopic.php?f=6&t=258\\ | http://archlinuxarm.org/forum/viewtopic.php?f=6&t=258\\ | ||
| Ligne 9: | Ligne 7: | ||
| - | Il n'y a pas vraiment d'utilité puisque le DockStar sera continuellement connecté à Internet mais c'est pour la bidouille.\\ | + | Il n'y a pas vraiment d'utilité si le Dockstar est continuellement connecté à Internet mais c'est pour la bidouille.\\ |
| - | ==== Principe ==== | + | ==== Principe et composants ==== |
| - | Ne voulant pas installer directement les composants sur le DockStar pour des raisons de place, je vais tout transférer sur une "perfboard" que je souderai ensuite sur le DockStar.\\ | + | Installation des composants constituant la RTC sur une "perfboard" soudée ensuite sur un côté du Dockstar.\\ |
| - | **!!** Par contre, sous cette forme, le boitier d'origine ne pourra plus être fermé. Ceci a peu d'importance étant donné que l'ensemble tiendra dans une boite spécialement achetée pour, mais ça, c'est une [[DockStar:Boitier|autre histoire]].\\ | + | **Sous cette forme, le boitier d'origine ne pourra plus être fermé.**\\ |
| + | CL'ensemble peut tenir dans une boite spécialement achetée pour, mais c'est une [[nas:dockstar:boitier|autre histoire]].\\ | ||
| + | |||
| + | === Schémas === | ||
| + | {{:dockstar:amelioration:ajout_rtc:schema_rtc_dockstar_eagle.png?direct&200|}} | ||
| + | |||
| + | === Composants === | ||
| + | * 2 condensateurs 22pF | ||
| + | * 1 résistance 10M | ||
| + | * 1 quartz 32,768 Hz | ||
| + | * 1 pile type bouton de 1,5V | ||
| ==== Avant modification ==== | ==== Avant modification ==== | ||
| - | Je ne mettrais pas de photo avant modification puisqu'il s'agit d'un DockStar tout ce qu'il y a de classique.\\ | + | Log de démarrage : |
| - | Au démarrage, j'ai le log suivant : | + | |
| <code> | <code> | ||
| [ 0.000000] Booting Linux on physical CPU 0 | [ 0.000000] Booting Linux on physical CPU 0 | ||
| Ligne 24: | Ligne 31: | ||
| [ 0.000000] CPU: VIVT data cache, VIVT instruction cache | [ 0.000000] CPU: VIVT data cache, VIVT instruction cache | ||
| [ 0.000000] Machine: Seagate FreeAgent DockStar | [ 0.000000] Machine: Seagate FreeAgent DockStar | ||
| - | [ 0.000000] Memory policy: ECC disabled, Data cache writeback | + | [...] |
| - | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 | + | |
| - | [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 | + | |
| - | [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) | + | |
| - | [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | + | |
| - | [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | + | |
| - | [ 0.000000] Memory: 128MB = 128MB total | + | |
| - | [ 0.000000] Memory: 126860k/126860k available, 4212k reserved, 0K highmem | + | |
| - | [ 0.000000] Virtual kernel memory layout: | + | |
| - | [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | + | |
| - | [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | + | |
| - | [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) | + | |
| - | [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) | + | |
| - | [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) | + | |
| - | [ 0.000000] .text : 0xc0008000 - 0xc02b1000 (2724 kB) | + | |
| - | [ 0.000000] .init : 0xc02b1000 - 0xc02cf000 ( 120 kB) | + | |
| - | [ 0.000000] .data : 0xc02d0000 - 0xc02ec9e0 ( 115 kB) | + | |
| - | [ 0.000000] .bss : 0xc02eca04 - 0xc02f9918 ( 52 kB) | + | |
| - | [ 0.000000] NR_IRQS:114 | + | |
| - | [ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0 | + | |
| - | [ 0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1 | + | |
| - | [ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms | + | |
| - | [ 1.181421] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) | + | |
| - | [ 1.271414] pid_max: default: 32768 minimum: 301 | + | |
| - | [ 1.271533] Mount-cache hash table entries: 512 | + | |
| - | [ 1.271786] CPU: Testing write buffer coherency: ok | + | |
| - | [ 1.271988] Setting up static identity map for 0x258140 - 0x25817c | + | |
| - | [ 1.273271] NET: Registered protocol family 16 | + | |
| - | [ 1.274243] Kirkwood: MV88F6281-A0, TCLK=200000000. | + | |
| - | [ 1.274257] Feroceon L2: Cache support initialised. | + | |
| - | [ 1.280523] bio: create slab <bio-0> at 0 | + | |
| - | [ 1.281466] SCSI subsystem initialized | + | |
| - | [ 1.282022] usbcore: registered new interface driver usbfs | + | |
| - | [ 1.282160] usbcore: registered new interface driver hub | + | |
| - | [ 1.282318] usbcore: registered new device driver usb | + | |
| - | [ 1.283400] Switching to clocksource orion_clocksource | + | |
| - | [ 1.284957] NET: Registered protocol family 2 | + | |
| - | [ 1.285088] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | + | |
| - | [ 1.285317] TCP established hash table entries: 4096 (order: 3, 32768 bytes) | + | |
| - | [ 1.285416] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) | + | |
| - | [ 1.285469] TCP: Hash tables configured (established 4096 bind 4096) | + | |
| - | [ 1.285479] TCP reno registered | + | |
| - | [ 1.285491] UDP hash table entries: 256 (order: 0, 4096 bytes) | + | |
| - | [ 1.285514] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | + | |
| - | [ 1.285686] NET: Registered protocol family 1 | + | |
| - | [ 1.287155] squashfs: version 4.0 (2009/01/31) Phillip Lougher | + | |
| - | [ 1.287168] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | + | |
| - | [ 1.287503] msgmni has been set to 247 | + | |
| - | [ 1.287533] io scheduler noop registered | + | |
| - | [ 1.287542] io scheduler deadline registered (default) | + | |
| - | [ 1.355554] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled | + | |
| - | [ 1.376376] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A | + | |
| - | [ 1.705671] console [ttyS0] enabled | + | |
| - | [ 1.710574] ONFI flash detected | + | |
| - | [ 1.713841] ONFI param page 0 valid | + | |
| - | [ 1.717345] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08AAD) | + | |
| - | [ 1.725053] Scanning device for bad blocks | + | |
| - | [ 1.817408] Bad eraseblock 1188 at 0x000009480000 | + | |
| - | [ 1.886064] Creating 3 MTD partitions on "orion_nand": | + | |
| - | [ 1.891230] 0x000000000000-0x000000100000 : "u-boot" | + | |
| - | [ 1.897122] 0x000000100000-0x000000500000 : "uImage" | + | |
| - | [ 1.902943] 0x000000500000-0x000010000000 : "root" | + | |
| - | [ 1.908951] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 | + | |
| - | [ 1.915931] mv643xx_eth smi: probed | + | |
| - | [ 1.921313] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address XX:XX:XX:XX:XX:XX | + | |
| - | [ 1.930287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | + | |
| - | [ 1.936901] orion-ehci orion-ehci.0: Marvell Orion EHCI | + | |
| - | [ 1.942203] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 | + | |
| - | [ 1.973444] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 | + | |
| - | [ 1.993431] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 | + | |
| - | [ 1.999961] hub 1-0:1.0: USB hub found | + | |
| - | [ 2.003759] hub 1-0:1.0: 1 port detected | + | |
| - | [ 2.008083] Initializing USB Mass Storage driver... | + | |
| - | [ 2.013153] usbcore: registered new interface driver usb-storage | + | |
| - | [ 2.019199] USB Mass Storage support registered. | + | |
| - | [ 2.323435] usb 1-1: new high-speed USB device number 2 using orion-ehci | + | |
| - | [ 2.475457] hub 1-1:1.0: USB hub found | + | |
| - | [ 2.479529] hub 1-1:1.0: 4 ports detected | + | |
| - | [ 2.763664] usb 1-1.2: new high-speed USB device number 3 using orion-ehci | + | |
| [ 2.877249] scsi0 : usb-storage 1-1.2:1.0 | [ 2.877249] scsi0 : usb-storage 1-1.2:1.0 | ||
| [ 3.033429] rtc-mv rtc-mv: internal RTC not ticking | [ 3.033429] rtc-mv rtc-mv: internal RTC not ticking | ||
| Ligne 111: | Ligne 40: | ||
| [ 3.056174] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) | [ 3.056174] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) | ||
| [ 3.062813] Waiting 10sec before mounting root device... | [ 3.062813] Waiting 10sec before mounting root device... | ||
| - | [ 3.874494] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS | + | [...] |
| - | [ 3.884689] sd 0:0:0:0: [sda] 7834944 512-byte logical blocks: (4.01 GB/3.73 GiB) | + | |
| - | [ 3.892999] sd 0:0:0:0: [sda] Write Protect is off | + | |
| - | [ 3.898297] sd 0:0:0:0: [sda] No Caching mode page present | + | |
| - | [ 3.903824] sd 0:0:0:0: [sda] Assuming drive cache: write through | + | |
| - | [ 3.912796] sd 0:0:0:0: [sda] No Caching mode page present | + | |
| - | [ 3.918327] sd 0:0:0:0: [sda] Assuming drive cache: write through | + | |
| - | [ 3.925461] sda: sda1 sda2 | + | |
| - | [ 3.930672] sd 0:0:0:0: [sda] No Caching mode page present | + | |
| - | [ 3.936206] sd 0:0:0:0: [sda] Assuming drive cache: write through | + | |
| - | [ 3.942328] sd 0:0:0:0: [sda] Attached SCSI removable disk | + | |
| - | [ 13.074683] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem | + | |
| - | [ 13.092822] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) | + | |
| - | [ 13.099947] VFS: Mounted root (ext2 filesystem) on device 8:1. | + | |
| - | [ 13.106210] Freeing init memory: 120K | + | |
| - | - preinit - | + | |
| - | Press the [f] key and hit [enter] to enter failsafe mode | + | |
| - | - regular preinit - | + | |
| - | [ 17.357677] EXT4-fs (sda1): re-mounted. Opts: (null) | + | |
| - | - init - | + | |
| - | + | ||
| - | Please press Enter to activate this console. [ 17.604372] loop: module loaded | + | |
| - | [ 17.632887] ip_tables: (C) 2000-2006 Netfilter Core Team | + | |
| - | [ 17.704670] nf_conntrack version 0.5.0 (1984 buckets, 7936 max) | + | |
| - | [ 17.808967] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | + | |
| - | [ 17.823012] uhci_hcd: USB Universal Host Controller Interface driver | + | |
| - | [ 17.836775] usbcore: registered new interface driver ums-alauda | + | |
| - | [ 17.849416] usbcore: registered new interface driver ums-cypress | + | |
| - | [ 17.862392] usbcore: registered new interface driver ums-datafab | + | |
| - | [ 17.875281] usbcore: registered new interface driver ums-freecom | + | |
| - | [ 17.888383] usbcore: registered new interface driver ums-isd200 | + | |
| - | [ 17.901085] usbcore: registered new interface driver ums-jumpshot | + | |
| - | [ 17.913939] usbcore: registered new interface driver ums-karma | + | |
| - | [ 17.926967] usbcore: registered new interface driver ums-sddr09 | + | |
| - | [ 17.940024] usbcore: registered new interface driver ums-sddr55 | + | |
| - | [ 17.953040] usbcore: registered new interface driver ums-usbat | + | |
| - | [ 17.967133] sd 0:0:0:0: Attached scsi generic sg0 type 0 | + | |
| - | + | ||
| - | + | ||
| - | + | ||
| - | BusyBox v1.19.4 (2012-06-16 19:13:10 CEST) built-in shell (ash) | + | |
| - | Enter 'help' for a list of built-in commands. | + | |
| - | + | ||
| - | _______ ________ __ | + | |
| - | | |.-----.-----.-----.| | | |.----.| |_ | + | |
| - | | - || _ | -__| || | | || _|| _| | + | |
| - | |_______|| __|_____|__|__||________||__| |____| | + | |
| - | |__| W I R E L E S S F R E E D O M | + | |
| - | ----------------------------------------------------- | + | |
| - | ATTITUDE ADJUSTMENT (Bleeding Edge, r32388) | + | |
| - | ----------------------------------------------------- | + | |
| - | * 1/4 oz Vodka Pour all ingredients into mixing | + | |
| - | * 1/4 oz Gin tin with ice, strain into glass. | + | |
| - | * 1/4 oz Amaretto | + | |
| - | * 1/4 oz Triple sec | + | |
| - | * 1/4 oz Peach schnapps | + | |
| - | * 1/4 oz Sour mix | + | |
| - | * 1 splash Cranberry juice | + | |
| - | ----------------------------------------------------- | + | |
| - | root@OpenWrt:/# | + | |
| </code> | </code> | ||
| ==== Modification ==== | ==== Modification ==== | ||
| === Matérielle === | === Matérielle === | ||
| - | {{:dockstar:amelioration:pict0424.jpg?direct&200|}} | + | {{:dockstar:amelioration:ajout_rtc:rtc_front.jpg?direct&200|}} |
| - | {{:dockstar:amelioration:pict0426.jpg?direct&200|}}\\ | + | {{:dockstar:amelioration:ajout_rtc:rtc_rear.jpg?direct&200|}}\\ |
| + | \\ | ||
| + | ** ATTENTION !! Pistes très fines, ne pas trop chauffer le circuit.**\\ | ||
| + | En grattant un peu la piste, possibilité de souder correctement si les connecteurs sont endommagés.\\ | ||
| \\ | \\ | ||
| - | Pour la soudure des points RTC_XIN et RTC_XOUT, j'ai perdu un peu la piste en chauffant trop le circuit.\\ | + | Avec la carte libre, les fils bougent et se détachent.\\ |
| - | En grattant un peu la piste, j'ai pu souder correctement.\\ | + | La "perfboard" soudée sur le circuit imprimé du Dockstar, les fils ne bougent plus et les soudures tiennent.\\ |
| - | Le fait est qu'au début, la carte étant libre, les fils bougeaient et mettaient tout en l'air.\\ | + | La soudure entre la carte du Dockstar et la "perfboard" permet de mettre le circuit à la masse.\\ |
| - | La "perfboard" soudée sur le circuit imprimé du DockStar, les fils ne bougent plus et les soudures tiennent.\\ | + | |
| - | Cette soudure permet de mettre le circuit à la masse.\\ | + | |
| - | + | ||
| - | J'ai d'autres photos pour ceux qui veulent.\\ | + | |
| === Logicielle === | === Logicielle === | ||
| Aucune modification n'est à réaliser. La RTC est prise en charge par défaut.\\ | Aucune modification n'est à réaliser. La RTC est prise en charge par défaut.\\ | ||
| + | |||
| ==== Après modification ==== | ==== Après modification ==== | ||
| Le log au démarrage : | Le log au démarrage : | ||
| Ligne 196: | Ligne 66: | ||
| [ 0.000000] CPU: VIVT data cache, VIVT instruction cache | [ 0.000000] CPU: VIVT data cache, VIVT instruction cache | ||
| [ 0.000000] Machine: Seagate FreeAgent DockStar | [ 0.000000] Machine: Seagate FreeAgent DockStar | ||
| - | [ 0.000000] Memory policy: ECC disabled, Data cache writeback | + | [...] |
| - | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 | + | |
| - | [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 | + | |
| - | [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) | + | |
| - | [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | + | |
| - | [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | + | |
| - | [ 0.000000] Memory: 128MB = 128MB total | + | |
| - | [ 0.000000] Memory: 126860k/126860k available, 4212k reserved, 0K highmem | + | |
| - | [ 0.000000] Virtual kernel memory layout: | + | |
| - | [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | + | |
| - | [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | + | |
| - | [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) | + | |
| - | [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) | + | |
| - | [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) | + | |
| - | [ 0.000000] .text : 0xc0008000 - 0xc02b1000 (2724 kB) | + | |
| - | [ 0.000000] .init : 0xc02b1000 - 0xc02cf000 ( 120 kB) | + | |
| - | [ 0.000000] .data : 0xc02d0000 - 0xc02ec9e0 ( 115 kB) | + | |
| - | [ 0.000000] .bss : 0xc02eca04 - 0xc02f9918 ( 52 kB) | + | |
| - | [ 0.000000] NR_IRQS:114 | + | |
| - | [ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0 | + | |
| - | [ 0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1 | + | |
| - | [ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms | + | |
| - | [ 4.441968] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) | + | |
| - | [ 4.531961] pid_max: default: 32768 minimum: 301 | + | |
| - | [ 4.532082] Mount-cache hash table entries: 512 | + | |
| - | [ 4.532333] CPU: Testing write buffer coherency: ok | + | |
| - | [ 4.532534] Setting up static identity map for 0x258140 - 0x25817c | + | |
| - | [ 4.533819] NET: Registered protocol family 16 | + | |
| - | [ 4.534786] Kirkwood: MV88F6281-A0, TCLK=200000000. | + | |
| - | [ 4.534800] Feroceon L2: Cache support initialised. | + | |
| - | [ 4.541057] bio: create slab <bio-0> at 0 | + | |
| - | [ 4.541995] SCSI subsystem initialized | + | |
| - | [ 4.542557] usbcore: registered new interface driver usbfs | + | |
| - | [ 4.542694] usbcore: registered new interface driver hub | + | |
| - | [ 4.542851] usbcore: registered new device driver usb | + | |
| - | [ 4.543935] Switching to clocksource orion_clocksource | + | |
| - | [ 4.545493] NET: Registered protocol family 2 | + | |
| - | [ 4.545622] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | + | |
| - | [ 4.545852] TCP established hash table entries: 4096 (order: 3, 32768 bytes) | + | |
| - | [ 4.545952] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) | + | |
| - | [ 4.546005] TCP: Hash tables configured (established 4096 bind 4096) | + | |
| - | [ 4.546014] TCP reno registered | + | |
| - | [ 4.546027] UDP hash table entries: 256 (order: 0, 4096 bytes) | + | |
| - | [ 4.546049] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | + | |
| - | [ 4.546221] NET: Registered protocol family 1 | + | |
| - | [ 4.547688] squashfs: version 4.0 (2009/01/31) Phillip Lougher | + | |
| - | [ 4.547702] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | + | |
| - | [ 4.548038] msgmni has been set to 247 | + | |
| - | [ 4.548068] io scheduler noop registered | + | |
| - | [ 4.548077] io scheduler deadline registered (default) | + | |
| - | [ 4.616125] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled | + | |
| - | [ 4.636941] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A | + | |
| - | [ 4.966236] console [ttyS0] enabled | + | |
| - | [ 4.971141] ONFI flash detected | + | |
| - | [ 4.974406] ONFI param page 0 valid | + | |
| - | [ 4.977911] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08AAD) | + | |
| - | [ 4.985618] Scanning device for bad blocks | + | |
| - | [ 5.077975] Bad eraseblock 1188 at 0x000009480000 | + | |
| - | [ 5.146637] Creating 3 MTD partitions on "orion_nand": | + | |
| - | [ 5.151804] 0x000000000000-0x000000100000 : "u-boot" | + | |
| - | [ 5.157693] 0x000000100000-0x000000500000 : "uImage" | + | |
| - | [ 5.163517] 0x000000500000-0x000010000000 : "root" | + | |
| - | [ 5.169525] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 | + | |
| - | [ 5.176507] mv643xx_eth smi: probed | + | |
| - | [ 5.181885] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address XX:XX:XX:XX:XX:XX | + | |
| - | [ 5.190862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | + | |
| - | [ 5.197475] orion-ehci orion-ehci.0: Marvell Orion EHCI | + | |
| - | [ 5.202775] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 | + | |
| - | [ 5.233978] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 | + | |
| - | [ 5.253965] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 | + | |
| - | [ 5.260489] hub 1-0:1.0: USB hub found | + | |
| - | [ 5.264282] hub 1-0:1.0: 1 port detected | + | |
| - | [ 5.268602] Initializing USB Mass Storage driver... | + | |
| - | [ 5.273675] usbcore: registered new interface driver usb-storage | + | |
| [ 5.279729] USB Mass Storage support registered. | [ 5.279729] USB Mass Storage support registered. | ||
| [ 5.284814] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 | [ 5.284814] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 | ||
| Ligne 278: | Ligne 75: | ||
| [ 5.308428] rtc-mv rtc-mv: setting system clock to 2000-01-01 00:05:56 UTC (946685156) | [ 5.308428] rtc-mv rtc-mv: setting system clock to 2000-01-01 00:05:56 UTC (946685156) | ||
| [ 5.316746] Waiting 10sec before mounting root device... | [ 5.316746] Waiting 10sec before mounting root device... | ||
| - | [ 5.583971] usb 1-1: new high-speed USB device number 2 using orion-ehci | + | [...] |
| - | [ 5.736011] hub 1-1:1.0: USB hub found | + | |
| - | [ 5.740074] hub 1-1:1.0: 4 ports detected | + | |
| - | [ 6.024208] usb 1-1.2: new high-speed USB device number 3 using orion-ehci | + | |
| - | [ 6.137797] scsi0 : usb-storage 1-1.2:1.0 | + | |
| - | [ 7.135036] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS | + | |
| - | [ 7.145232] sd 0:0:0:0: [sda] 7834944 512-byte logical blocks: (4.01 GB/3.73 GiB) | + | |
| - | [ 7.153542] sd 0:0:0:0: [sda] Write Protect is off | + | |
| - | [ 7.158841] sd 0:0:0:0: [sda] No Caching mode page present | + | |
| - | [ 7.164363] sd 0:0:0:0: [sda] Assuming drive cache: write through | + | |
| - | [ 7.173340] sd 0:0:0:0: [sda] No Caching mode page present | + | |
| - | [ 7.178866] sd 0:0:0:0: [sda] Assuming drive cache: write through | + | |
| - | [ 7.186005] sda: sda1 sda2 | + | |
| - | [ 7.191215] sd 0:0:0:0: [sda] No Caching mode page present | + | |
| - | [ 7.196746] sd 0:0:0:0: [sda] Assuming drive cache: write through | + | |
| - | [ 7.202867] sd 0:0:0:0: [sda] Attached SCSI removable disk | + | |
| - | [ 15.325225] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem | + | |
| - | [ 15.341848] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended | + | |
| - | [ 15.351992] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) | + | |
| - | [ 15.359115] VFS: Mounted root (ext2 filesystem) on device 8:1. | + | |
| - | [ 15.365375] Freeing init memory: 120K | + | |
| - | - preinit - | + | |
| - | Press the [f] key and hit [enter] to enter failsafe mode | + | |
| - | - regular preinit - | + | |
| - | [ 19.563596] EXT4-fs (sda1): re-mounted. Opts: (null) | + | |
| - | - init - | + | |
| - | + | ||
| - | Please press Enter to activate this console. [ 19.810606] loop: module loaded | + | |
| - | [ 19.838546] ip_tables: (C) 2000-2006 Netfilter Core Team | + | |
| - | [ 19.910687] nf_conntrack version 0.5.0 (1984 buckets, 7936 max) | + | |
| - | [ 20.015120] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | + | |
| - | [ 20.029202] uhci_hcd: USB Universal Host Controller Interface driver | + | |
| - | [ 20.042941] usbcore: registered new interface driver ums-alauda | + | |
| - | [ 20.055724] usbcore: registered new interface driver ums-cypress | + | |
| - | [ 20.068796] usbcore: registered new interface driver ums-datafab | + | |
| - | [ 20.081580] usbcore: registered new interface driver ums-freecom | + | |
| - | [ 20.094685] usbcore: registered new interface driver ums-isd200 | + | |
| - | [ 20.107498] usbcore: registered new interface driver ums-jumpshot | + | |
| - | [ 20.120100] usbcore: registered new interface driver ums-karma | + | |
| - | [ 20.133020] usbcore: registered new interface driver ums-sddr09 | + | |
| - | [ 20.146069] usbcore: registered new interface driver ums-sddr55 | + | |
| - | [ 20.159075] usbcore: registered new interface driver ums-usbat | + | |
| - | [ 20.173162] sd 0:0:0:0: Attached scsi generic sg0 type 0 | + | |
| - | + | ||
| - | + | ||
| - | + | ||
| - | BusyBox v1.19.4 (2012-06-16 19:13:10 CEST) built-in shell (ash) | + | |
| - | Enter 'help' for a list of built-in commands. | + | |
| - | + | ||
| - | _______ ________ __ | + | |
| - | | |.-----.-----.-----.| | | |.----.| |_ | + | |
| - | | - || _ | -__| || | | || _|| _| | + | |
| - | |_______|| __|_____|__|__||________||__| |____| | + | |
| - | |__| W I R E L E S S F R E E D O M | + | |
| - | ----------------------------------------------------- | + | |
| - | ATTITUDE ADJUSTMENT (Bleeding Edge, r32388) | + | |
| - | ----------------------------------------------------- | + | |
| - | * 1/4 oz Vodka Pour all ingredients into mixing | + | |
| - | * 1/4 oz Gin tin with ice, strain into glass. | + | |
| - | * 1/4 oz Amaretto | + | |
| - | * 1/4 oz Triple sec | + | |
| - | * 1/4 oz Peach schnapps | + | |
| - | * 1/4 oz Sour mix | + | |
| - | * 1 splash Cranberry juice | + | |
| - | ----------------------------------------------------- | + | |
| - | root@OpenWrt:/# | + | |
| </code> | </code> | ||
| - | |||
| - | Où l'on voit bien la différence.\\ | ||
| - | Avant : | ||
| - | <code> | ||
| - | [ 3.033429] rtc-mv rtc-mv: internal RTC not ticking | ||
| - | [ 3.056174] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) | ||
| - | </code> | ||
| - | Après : | ||
| - | <code> | ||
| - | [ 5.284814] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 | ||
| - | [ 5.308428] rtc-mv rtc-mv: setting system clock to 2000-01-01 00:05:56 UTC (946685156) | ||
| - | </code> | ||
| - | \\ | ||
| - | Étape suivante : [[DockStar:Amelioration:Ajout SD-Card]] | ||
nas/dockstar/amelioration/ajout_rtc.1340387994.txt.gz · Dernière modification: 14 /11/2016 13:12 (modification externe)
Sauf mention contraire, le contenu de ce wiki est placé sous les termes de la licence suivante : CC Attribution-Share Alike 4.0 International
